|
Temp. Range :Ambient to 99.9 º C/ 0 º C to 99.9 º C /
-10º C To 99.9 º C Accuracy : +0.1 º C to 0.5 º C
Applications
Equipment specially designed & suitable for Electronic Industry, Space
Programs Research, Research Labs, Defense Labs, Blood Banks, Biological
Specimens, Serum, Vaccines, Research Laboratories Medical Specimens,
Clinical Samples, Industrial research etc, for testing under extreme low
temp. conditions.
 |
Construction :
Fabricated on heavy angular structure, triple walled chamber, two
chamber of AISI S.S 304.
The exterior chamber from CRCA Sheet duly powder coated with PUF
insulation.
Circulation :
Forced air circulation to ensure uniform temp. (Applicable for vertical
models only.)
Door :
Double door for vertical models only. ,first one of 6 mm acrylic & the
second one of metal with two walls & PUF insulation. Top opening single
door for horizontal models.
Refrigeration Systems:
A suitable capacity hermetically sealed compressor with cooling coils,
condensing coils, fan motor & electrical accessories are incorporated
for bringing down the temp. to required level.
Temp. Control:
Digital temp. Control with 24 hrs timer.
|
Optional:
Micro processor based temp. Control with PC interface & strip Chart
Recorder.
Safety Measures:
Built-in temp. deviation audio/visual alarm. safety thermostat for over
shoot temp. cut off safety circuit to cut off the whole system in case
of malfunction (Only applicable in microprocessor based models). HRC
fuses for compressor heaters & mains, time delay circuit for safety of
compressor etc. circuit breakers for over & under temp. conditions.
Special Attention :
Must be kept in a A. C Room & suitable rating Servo Controlled Voltage
Stabilizer is recommended.
* Due to continuous development &
improvements in design, we reserve the right to change the specification
without notice
|
