Salt Spray Corrosion Cabinet, Salt Spray Corrosion Chamber, Bacteriological Incubator, Mumbai, India  

  Home
  Products
  Introduction
  Profile
  Enquiry
 
        

Salt Spray Corrosion Cabinet

 

Salt Spray Corrosion Cabinet

Application:
These chamber are used to study the deterioration in painted films when put under exposure to salt solution & to test the corrosion resistance of protective coating of on ferrous & non ferrous material.

The apparatus consists of Perspex chemically inert container (Acrylic) with a close fitting cover in which a fine mist of the spray solution is produced through an atomizer.

Panels supported on non metallic supports with the test face upwards at our angle of 158to the vertical are evenly located with droplets of solutions.

The salt spray is prevented from impinging directly on the test faces of the panels.

The panels are equally placed at a distance of 20mm from each other as well as from the walls.

Salt solution from the panels are not re-circulated.

The chamber has gable type cover.

The spray nozzle is also of the inert material & placed in front of the deflector plate.

Accessories : Sample hangers & trays.

300D x 470W x 380H
16 Panels / 30 SSC 01
300D x 570 W x 380H
24 Panels / 30 SSC 02


Due to continuous development & improvements in design, we reserve the right to change the specification without notice.

 

Products

Autoclave
B. O. D Incubator
Constant Temperature Circulating Bath
Deep Freezer
Dehumidifier
Humidity Chamber
Ice Flakers
Laboratory Oven
Laminar Flow
Low Temperature Circulating Bath

Muffle Furnace
Stability Chamber
Tergo Tometer
Thermal Shock Chamber
Tray Dryer
Ultra Low Temperature Freezer
Universal Water Bath
Vacuum Oven
Viscometric Bath
Water Still

Cold Chamber
Low Temp. (Horizontal / Frost Free Vertical)
Walk - In Incubator / Cooler
Walk - In Stability Chamber
Walk - In Humidity Environmental Test Chamber
Salt Spray Corrosion Cabinet
 

Designed & Hosted by : MID   Promoted by : GID